If you’ve ever smoked indoors and needed to mask the smell, you’ve probably wondered: What is a sploof, and how do you use one? Whether you’re trying to keep the air fresh while smoking cannabis or simply trying to reduce odors from other sources, the sploof is a simple yet effective solution.
This guide will answer all your burning questions about how to make a sploof, including variations like how to make a sploof without dryer sheets and homemade sploof ideas.
What is a Sploof?
In its most basic form, a sploof is a homemade device that helps filter and mask the smell of smoke. It works by forcing smoke through a material that absorbs or neutralizes odors before they reach the air. While commonly used for cannabis smokers, a sploof can also be useful for cigarette or incense smoke.
The most popular sploof design uses dryer sheets to filter the smoke, but other materials can be used, such as activated carbon. Regardless of the material, the result is the same: reduced smoke odor.
Why use a Sploof?
The main reason people use sploofs is to mask the smell of smoke. Whether you’re smoking in a dorm room, your apartment, or your parents’ house, a sploof can help reduce the chances of someone noticing the smell. If you’re concerned about smoking discreetly, using a sploof is one of the easiest and most affordable ways to handle the situation.
So how exactly does a sploof work? Simply put, you exhale your smoke into the open end of the sploof and the air passes through the material inside, trapping most of the odor before it escapes into the room. The dryer sheets or activated charcoal are the key to neutralizing the odor.
How to make a Sploof with dryer sheets
One of the most common methods of making a sploof is to use dryer sheets. It’s easy to make, inexpensive, and highly effective when done correctly. Here’s how to make your own sploof:
Materials needed
- Toilet paper roll or a cardboard tube
- Dryer sheets (3 to 4 sheets)
- Tape or rubber bands
- Scissors (optional)
Step 1: Seal one end of the Roll
Start by sealing one end of the toilet paper roll with tape or a rubber band. This will prevent the smoke from escaping and allow it to pass through the dryer sheets.
Step 2: Insert dryer sheets
Take your dryer sheets and roll them into the tube. Place them tightly inside, making sure they’re secured well enough so they won’t fall out. If the sheets are too large, you can cut them into smaller pieces to make them fit better.
Step 3: Test the Sploof
Before using the Sploof, test it by gently exhaling through it. You should notice that the smoke is filtered through the dryer sheets, leaving behind a fresher scent. If necessary, add more dryer sheets for a stronger scent masking effect.
How to make a Sploof with activated carbon
For those who want a more advanced version, the use of activated carbon provides even better odor neutralization. Activated carbon has small pores that trap and absorb chemicals, including the pungent odor of smoke.
Materials needed
- Plastic bottle (preferably one with a wide neck)
- Activated carbon (available at most pet stores)
- Scissors
- Tape or rubber bands
Step 1: Prepare the bottle
Start by cutting the bottom off of a plastic bottle, leaving just the top portion. This will act as the casing for your sploof.
Step 2: Fill with activated carbon
Carefully fill the bottle with activated carbon. Make sure there鈥檚 enough to cover the opening at the top but not so much that it blocks airflow.
Step 3: Secure the Sploof
Place a piece of mesh or cloth over the top of the bottle to act as a filter. Secure it with tape or rubber bands. Now, you have a sploof with activated carbon that will filter out more smoke odor than the traditional dryer sheet version.
How to make a Sploof without dryer sheets
Maybe you’re out of dryer sheets or just want to try something different. No worries-there are plenty of alternative ways to make a homemade sploof without them.
What you鈥檒l need:
- Toilet paper roll or any cardboard tube
- Tissues, paper towels, or fabric (such as an old sock)
- Rubber bands or tape
- Activated charcoal (optional)
Making a Sploof without dryer sheets: Step-by-Step
- Seal one end of the tube with tape or a rubber band.
- Insert a fabric or tissue that鈥檚 tightly rolled or packed inside. If you have activated carbon, you can place a thin layer at the end for better odor absorption.
- Secure the open end with a piece of cloth or another rubber band.
Now, you have a functional sploof without relying on dryer sheets!
How well does a Sploof work?
Sploofs work surprisingly well, especially when made with quality materials. However, their effectiveness depends on factors such as the type of smoke and the quality of your sploof materials. A sploof with activated carbon will be the most effective at neutralizing odors, while one with dryer sheets may leave a pleasant, fresh scent, but won’t absorb as much smoke.
While not a 100% foolproof solution, a homemade sploof can certainly help reduce the chances of someone noticing the smoke smell in a room.
Tips for how to use a Sploof
- Exhale slowly: This allows the smoke to be filtered through the sploof properly.
- Use in a well-ventilated room: Open a window for best results.
- Clean regularly: Over time, your sploof will lose effectiveness, so be sure to replace the materials as needed.
How long does a Sploof last?
The life of your sploof depends on how often you use it. A dryer sheet sploof will typically last 1-2 weeks depending on how often it’s used. An activated carbon sploof, on the other hand, can last for several months before it needs to be replaced.
4 Recommended Sploofs to try right now
If you’re not into DIY, some great commercial sploofs provide high-quality results.
Smokebuddy
This compact sploof is portable, effective, and easy to use. It鈥檚 perfect for on-the-go smokers who want to keep their sessions discreet.
Smoke Trap 2.0
An excellent alternative with a sleek design, this sploof features advanced filtering technology to neutralize odors.
Sploofy Pro II
This device is known for its long-lasting carbon filters, making it a reliable option for frequent use.
Smoke Hunter 1.0
Another great option for those who need a high-quality, easy-to-use sploof. Its small size makes it perfect for travel.
Frequently Asked Questions (FAQs)
How do you make a Sploof?
To make a basic sploof, you’ll need a roll of toilet paper, dryer sheets, and tape. Seal one end of the roll, insert the dryer sheets, and secure the open end with tape. Exhale through the tube to filter out the smoke.
What is in a Sploof?
A typical sploof contains a material like dryer sheets, activated carbon, or fabric that absorbs and neutralizes smoke odors.
Do homemade sploofs work?
Yes, homemade sploofs can effectively reduce or mask smoke odors. For better results, consider using activated carbon or other odor-absorbing materials.
How do you get a Sploof?
You can either make a DIY sploof using everyday materials or buy a commercial sploof from stores online.
Can you use a towel as a Sploof?
A towel can be used, but it鈥檚 not as effective as dryer sheets or activated carbon. It may just absorb some of the smoke rather than neutralize it.
How many times can you use a homemade sploof?
A homemade sploof can be used multiple times. However, as the material absorbs smoke, its effectiveness will decrease over time, so it’s important to refresh the materials regularly.
Conclusion
Now that you know what a sploof is and how to make one, you’re ready to mask those unwanted smoke smells like a pro! Whether you use dryer sheets or activated charcoal, the DIY sploof is an easy, affordable, and effective way to maintain discretion. Have you ever tried making one? Let us know in the comments, and don’t forget to share this guide with your friends!